Cabling and power guides
Short, practical explanations for consultants, contractors, and IT teams specifying network infrastructure in Singapore. Each guide links to the products AmberWork Source stocks.
Cat6 vs Cat6A: which to specify for Singapore offices
Specify Category 6A when the horizontal channel must support 10 Gigabit Ethernet to 100 metres. Category 6 is enough when the design is 1 Gigabit to the outlet and 10 Gigabit is limited to short links in the cabinet.
Read the guideOM3 vs OM4 vs OM5 vs OS2 fibre explained
Use OM3 or OM4 when the transceivers are multimode and the runs are short. Use OS2 singlemode for long runs and for new links that should survive several speed upgrades. OM5 is a special case, not the default.
Read the guideLSZH vs PVC cable for Singapore buildings
PVC is the lower-cost jacket. LSZH (low smoke, zero halogen) is specified where people or sensitive equipment would be exposed to smoke and corrosive gas. Follow the project specification and the consultant; do not treat this page as a fire-code determination.
Read the guideSYSTIMAX vs NETCONNECT: what’s the difference
Both are CommScope. SYSTIMAX is the premium enterprise platform, including GigaSPEED copper and the imVision intelligent-infrastructure option. NETCONNECT is the standard structured cabling line used for straightforward LAN projects. AmberWork Source supplies both in Singapore.
Read the guideU/UTP vs F/UTP vs S/FTP shielding explained
U/UTP has no shield. F/UTP has an overall foil. S/FTP has a braid plus a foil on each pair. Use shielded cable when the specification or the electrical environment calls for it, and terminate the shield. Unshielded cable is the right default when the pathway is quiet.
Read the guideHow to choose a rack PDU: basic, metered or switched
Start with voltage, phase, amperage, and the inlet. Then count the outlets. Choose a basic PDU to distribute power, a metered PDU to see the load, or a switched PDU when someone must turn outlets on and off remotely.
Read the guide